Questions to Ask a Contractor Before You Hire in Utah

Homeowner and contractor review a remodel

The questions that matter fall into six groups: proof of license and insurance, experience you can check, permits, scope and schedule, the payment schedule and contract, and the warranty. Ask them of every builder or remodeler on your list, in the same order, and write the answers down. A good contractor answers each one with a document, a name or a number, not a reassurance. We build custom homes, remodels and additions in Washington and Iron Counties, and the list below is the one we would use if we were the homeowner.

Prestigioushome
Plan Your Utah Home Project
Prestigioushome builds custom homes, remodels kitchens and bathrooms, and adds rooms throughout Washington and Iron Counties.
Visit

TL;DR

  • Verify the license yourself on Utah’s state licensing site, and ask for a current certificate of insurance before you talk price.
  • Ask for three to five references on projects like yours, and visit a finished job if you can.
  • Get permits, payment milestones, change orders and warranty terms into the written contract, and never pay in full before the work is done.
  • Compare bids only after every bidder has priced the same scope, materials and allowances.
  • Ask who your single point of contact will be from design through the final walkthrough.

Table of Contents

Start with proof: license, insurance and who is on your site

These questions take ten minutes and screen out most of the risk, so ask them first.

Are you licensed in Utah, and what is the license number? In Utah, contractor licenses are issued by the state’s Division of Professional Licensing (DOPL). Do not rely on a card or a truck decal. Search the name or number on the DOPL site, confirm the status is active and not expired, and check the classifications listed, which show the kind of work the license covers. One Utah city’s building division notes that contractor license numbers end in -5501 and that a search with no result means the person is not licensed in Utah. The state’s licensing office can answer questions by phone if a record looks unclear.

Can I see your certificate of insurance? FEMA’s contractor checklist tells homeowners to ask for proof of general liability insurance and to verify it with the issuing authority, not just accept a photocopy. The same checklist says to ask about workers’ compensation, noting that a contractor with no employees may not carry it. If a crew will be on your property, the answer matters: it determines who pays if someone is hurt on your job.

Who will actually do the work, and who supervises it? FEMA’s checklist also asks for the names, work and credentials of subcontractors and for the name of the person supervising. Ask how many projects the builder is running at once. The Oregon Construction Contractors Board lists concurrent workload and who performs the work among the points a bid should clarify.

Who is my one point of contact? This is the question that predicts how the next six months will feel. On our projects, one person is your contact for both design and construction, so you are not relaying messages between a designer and a crew.

Ask for experience you can check

Length of time in business matters because someone has to answer your warranty call later. The National Association of Home Builders (NAHB) says an established company is more likely to be around to service warranties, and its guide gives three to five years as a typical establishment period, not a hard cutoff.

Then move from years to relevant work:

  • Have you built or remodeled something like mine? A second-story addition, a basement ADU and a kitchen expansion are different jobs. Ask for photos and for a house you can walk through.
  • Can I talk to recent clients? FEMA recommends contacting three to five clients who had similar work done and asking about satisfaction, budget, timing, delays and whether they would hire the contractor again.
  • What did you do when something unexpected came up? The Wisconsin Builders Association suggests asking references about schedule, budget, plan changes, change orders and warranty follow-up. Every project has a surprise. What you want to learn is how it was handled, communicated and priced.

If a contractor will not provide references, treat that as an answer. NAHB lists refusing references, no permanent business location, an unusually low bid and an incomplete written contract as reasons to reconsider.

If you are choosing a builder for a full new home, our checklist and interview script for choosing a home builder puts these questions in the order you would ask them.

Questions about permits and plans

Who pulls the permits? Get the answer in writing. The Oregon checklist advises listing the required permits and who will obtain them in the contract. Virginia’s licensing agency adds two practical points: the permit applications should match the contracted work, and you should get copies of issued permits before work starts.

Do you know the local permitting office? Washington and Iron County projects can fall under a county or a city such as St. George, Cedar City, Hurricane or Washington City, each with its own submittal process. Ask the contractor to describe how recent permits went in your jurisdiction. A builder who works in the area regularly will answer without hesitation. BC Housing’s consumer guide also lists local permitting experience among the topics to raise when you interview builders.

What will I see before you build? Ask how you will review the design. We use virtual consultations and 3D renderings so you can see the layout, and change it, before anything is framed. Whoever you hire, make sure you approve plans you can actually picture, not only a stack of drawings.

A permit inspection is not a quality guarantee. It checks code compliance, so the contract still has to define what finished work looks like.

Questions about scope, schedule and communication

Most disputes in remodeling come from a gap between what the homeowner pictured and what the paper says. Close that gap before signing.

What exactly is included? Ask for a line-by-line scope: demolition, framing, electrical, plumbing, finishes, cabinets, countertops, flooring, fixtures, cleanup and disposal. Ask which materials are allowances, meaning a set budget for items you have not chosen yet, such as tile or lighting, and what happens if your selection costs more.

Is every bid priced on the same scope? NARI, the remodeling industry association, advises comparing bids only after aligning scope and quality, because a lower number can simply mean less work. Put the bids side by side and mark every line one contractor included and another left out. A step-by-step renovation guide can help you sequence the work so you know which line items to expect.

What are the start and finish dates, and what can move them? The NSW Building Commission suggests setting realistic start and completion dates that account for weather or late materials, putting total and estimated costs in writing and including site-cleaning arrangements in the contract. Ask for milestones, not just an end date. For an addition, our home addition timeline shows how the phases usually fall.

How will we communicate? Ask how often you will get updates, by what channel, and who answers when you call. Ask about household logistics too: where materials are stored, how the site is cleaned each day and how long water or power might be off. The Canadian Home Builders’ Association’s renovation-contract guide recommends discussing household disruption, daily and final cleanup and material storage before work begins.

What happens to changes? The same guide recommends a signed change order for any addition or deletion, noting that extras may cost more or cause delays. The rule is simple: no change without a written, signed and dated order that states the price and the schedule effect.

Questions about price, payments and the contract

What does this cost, and is that a fixed price or an estimate? Contract structure changes who carries the risk of cost overruns. Our guide to construction contract types explains the main formats so you know what you are signing.

It also helps to have a realistic range before the first call. These are the ranges published on our service pages:

Project Published range
Small bathroom remodel $10,000 to $15,000
Small kitchen remodel $20,000 to $40,000
Mid-range kitchen remodel $40,000 to $70,000
Bedroom addition $25,000 to $75,000
Family room addition $40,000 to $120,000
Second story addition $80,000 to $250,000
Garage conversion ADU $60,000 to $120,000
Basement ADU $80,000 to $150,000
Attached ADU $120,000 to $200,000

Custom homes, luxury kitchens, primary bathrooms and detached ADUs are priced per project. For what moves a home’s price, see what affects the cost of building a home.

What is the payment schedule? The Oregon checklist says payments should be tied to completed work, with nothing paid in full upfront. FEMA’s checklist says never to pay the contractor in full before completion and recommends a written schedule for multimonth work. The Canadian guide describes a deposit followed by progress payments at milestones as common practice. Our projects follow that pattern: a deposit, then progress payments tied to project milestones.

Is a low bid a bargain? NAHB cautions that an unusually low bid may signal a contractor who cannot pay for labor and materials as the job proceeds. Price against scope, not against the lowest number.

What must the written contract list? The Oregon checklist names these items: materials and allowances, permits and who obtains them, the payment schedule, signed and dated change orders, workmanship warranties and what they cover, start and completion dates, total price and the contractor’s contact details. If any of these is missing, ask for it to be added before you sign.

Seven key items in a contractor contract

Will I be protected if a subcontractor is not paid? In Utah this has a specific answer. The state’s Residence Lien Restriction and Lien Recovery Fund Act can bar liens and judgments against a homeowner who meets its conditions, which include a written contract with a licensed contractor and paying the original contractor in full according to the contract. Ask your contractor how the project will be handled under the Act, and read the state’s page for the full conditions before you sign.

Questions about warranty and what happens after

What does the warranty cover, and for how long? The Canadian guide recommends clarifying workmanship and material warranty coverage and duration, getting applicable manufacturer warranties, and agreeing on a dispute process in advance. It describes calm, direct discussion as a useful first step. Ask who you call, how fast they respond and whether the answer is the same person who ran your project. For new builds, our new construction warranty guide explains coverage, dates and claims, including how long coverage lasts and who backs your warranty.

What happens at the end? Ask about the final walkthrough, a punch list of remaining items and when final payment is due. Final payment should follow completion and your sign-off.

Questions by project type

The core list is the same everywhere. A few additions sharpen it.

  • New custom home: Ask how the process works on your own lot, who handles site and utility questions, and how design decisions are scheduled. Our walkthrough of building on your lot and the home building steps show what to expect.
  • Kitchen or bathroom remodel: Ask for the cabinet, countertop and fixture allowances, and how long the kitchen will be out of service.
  • Room addition: Ask how the new structure ties into the existing roof, HVAC and electrical panel, and who coordinates those trades.
  • Casita or ADU: Ask what the estimate includes. Our piece on what casita builders include in an estimate lists the line items to look for.
  • Energy-efficient upgrades: Ask which improvements are in the scope, such as insulation, windows and mechanical systems, and what the plans specify for each.

Before construction starts, hold a meeting with the whole team. Our preconstruction meeting agenda gives eight items you can use word for word.

How to run the interviews

  1. Shortlist three builders. BC Housing’s guide recommends interviewing several rather than settling for the first, comparing approach, communication and pricing.
  2. Send the same scope and plans to each, so the bids can be compared.
  3. Verify license and insurance before the meeting, not after.
  4. Ask the questions above in the same order and take notes.
  5. Call the references and visit a finished project.
  6. Read the full contract away from the sales conversation, and mark every blank.

A contractor who welcomes this process is usually one who runs jobs the same way.

Our view

After years of building and remodeling homes in Washington and Iron Counties, the thing we would tell a friend is that the best predictor of a good project is how clearly the contractor answers the dull questions. Who is my contact? What is in writing? When do I pay?

We built our process around those answers. You work with one point of contact for both design and construction, you see your home in 3D renderings and virtual consultations before building starts, and the cost and the process are laid out so you know what comes next. Deposits and progress payments are tied to project milestones, so payments follow the work.

Ask us every question in this article. We would rather you sign knowing exactly what you bought.

Jake

Talk to us about your project

We build custom homes, kitchen and bathroom remodels, room additions, basement and garage finishing, and casita and ADU projects across Washington and Iron Counties. If you are ready to put these questions to us, start with the page for your project: custom home construction, kitchen remodeling, room additions or ADU builds, or reach us through our site.

Prestigioushome

FAQ

How many contractors should I interview?

Three is a practical number. It gives you enough to compare approach, communication and pricing without losing months. Send each the same plans and scope so the bids line up.

How do I check a contractor’s license in Utah?

Use the license verification search on the Utah Division of Professional Licensing website. Search by name, business or license number, confirm that the status is active and read the classifications to see what work the license covers.

How much should I pay upfront?

Tie payments to completed work and agree on the schedule in writing before signing. FEMA’s checklist says never to pay the contractor in full before the work is complete. A deposit followed by milestone payments is a common structure.

What are the biggest red flags?

NAHB points to refusing references, having no permanent business location, an unusually low bid and a contract that is not complete or clearly written. Any one of these is reason to pause before you sign.

Sources

Images in this article are editorial illustrations, not Prestigious project photography.

Southern Utah

Let’s Talk About Your Home.

Request a consultation